Frequently Asked Questions
Stay updated on air quality monitoring news and updates
Frequently Asked Questions
Stay updated on air quality monitoring news and updates
Frequently Asked Question
The electrochemical sensors in the device are consumables.
No
No, there is a provision of internal storage upto 16 GB which can store data for at least 3 monhts. However, the device needs to be atleast powered and switched on at all times, then only the device will be able to store data in offline mode
Avg. Power Consumption is upto 7 Watts for Polludrone, Odosense, Weathercom, Dustroid (Pro and Max variants can consume upto 42W and 60W respectively)
Yes. In case of GSM,Wifi,Ethernet with internet connection availability only.
Yes. With the remote assistance from the Oizom team.
Yes. Envizom can send WebApp (in-app) notification and email notification and also SMS Notifications as alerts. In AQBot we can also offer a buzzer alarm with light for instanteneous notification
Yes, we can have all combinations of connectivity where GSM-Wifi-LoRa and also wired communications can work simultaneously.
Data backup is possible only till the internal/external battery backup lasts. In case no power is available after the battery is discharged, there will no data backup.
No, Ethernet can only used for data communication in Oizom devices.
Oizom solutions are for Ambient and Industrial monitoring. Monitoring in directly Industrial chimneys is Stack Monitoring or Emissions monitoring. However, Oizom does provide air quality monitoring in the surrounding ambient of an industry and fenceline monitoring in Industries but not directly at the source.
"Only in AQBot and Pollusense there is a provision of on-device Display.
There is no provision of local display on Polludrone, Odosense, Weathercom, AQBot, Dustroid."
The end client familiar with the location can perform the basic site survey based on the site survey checklist that we shall provide. Upon confirmation of all the necessary checks, Oizom and the end client will finalize the site. Power and the chosen network connectivity is of utmost important alongwith availability of Pole or wall mounting.
Since wall mounted device will not be a 360 degree solution, one can observe minor variations in the readings.
No, we do not provide Solar Panel system and it's accessories. However we do provide DC Cable which can be plugged in the central connector of the PSU where 24V DC and 2 A is recommended.
No, however if you have a custom requirement we have a different prototype to test.
Periodic spot calibration i.e zero gas calibration is recommended every 6 months. Every 12 months span calibration can also be performed.
The device's sample inlet is designed to allow smooth flow without choking. If the periodic maintenance schedule is followed, there are very less chances of the device getting choked. Quarterly maintenance is recommended. However, in case of solar panel integration, frequent cleaning of solar panels may be required for optimum solar panel charging.
Yes, the exterior can be cleaned using dry cloth and general blower in an active flow to all inlets, without using any harsh chemicals or high intensity fan speed.
The gross weight of Polludrone, Odosense, Dustroid, Weathercom is 9.8 kg.
The weight of AQBot is 2.8 kg.
The weight of Pollusense is 9 kg
The dimensions of Polludrone, Odosense, Dustroid, Weathercom are 199mm x 321mm x 372mm (HxWxD).
AQBot has 210mm (W) × 258mm (H) × 105mm (D). Pollusense size is Size (HxWxD)
503(L) x406(W)x193(H)
Sensor life is highly dependent on sensor type, working principle and location of installation. Please refer our product datasheets for the details.
Oizom Products can withstand harsh weather condition ranging from -20 to 60 deg C
12.8V 6 Ah LiFePO4 batteries
The device body is made out of premium grade Aluminium Magnesium alloy, mild steel, FRP.
No. The device needs to be started once manually through the push button provided. In case of GSM availability, once network connectivity is established, Oizom team can
restart it remotely.
It is highly variable based on the Dust levels at the site of installation but we recommend to clean the surface of the solar panel once every month.
Smart device firmware verifies data stability constantly and notifies whenever there is any fluctuation observed. Our Support team also notifies if the data is incorrect
Oizom devices are IP65 Certified.
Oizom has capabilities to monitor upto 20 parameters from one single device. 9 Gases + PM1, PM2.5, PM10, PM100, Temperature Humidity, Pressure, Noise(Leq, Lmin, Lmax), Wind Direction, Wind Speed, Rain.
Yes
No, our standard offering is 12.8V 6 Ah LiFePO4 battery which can support upto 24 hours.
No, however if installed at a very heighted place the pole is recommended to have grounding available.
In this case, the device will function properly. However, there could be a variation in the data. Contact support@oizom.com for replacement.
Yes, all are communication modes have a fallback mechanism to available wireless or wired communication to ensure connectivity is not lost.
Oizom devices can function for upto 12 Hours. However, if there is a provision of solar power and external battery setup with a charge controller, the device can run as long as the weather is clear, and external battery setup does not run out.
Charging gets affected if the weather is cloudy. However, the rate of charging varies depending on the cloudy conditions. Based on trials, power backup in the range of 10-50% can be achieved for the device to function.
Device uses 24V DC power. However, it is recommended to use a tester prior to handling the device under such situations.
There could be various reasons: (i) Internal charging I/C failure (ii) low voltage (iii) excess humidity on the PCB (iv) voltage spike (v) no power source. Contact Oizom Team for resolving the issue.
No, the body of the device is not electrically conductive.
It is recommended to finalize all the parameters at the time of ordering. Need based addition can be done depending on the type of sensors.
All the devices are calibrated by the NABL recognized laboratory to ensure the optimum data quality.
No radiation is emitted other than standard GSM, Wifi, LoRa radiations which are negligible and very minor.
Yes, Oizom can provide Cloud based RESTFUL HTTPS APIs, Oizom can also support on-premise local deployment. MQTT, TCP/IP protocol is support for direct data for third party servers as well.
The device is dependent on a continuous power supply with a power backup and network availability. It can have an uptime of 100% with 24x7 availability
Yes. All the sensors go through a third party calibration to ensure optimum performance.
Upto 16 GB is supported.
Green Blinking - Network Search, Cyan Blinking - Connecting to Network,
Yellow Blinking - Setting Configuration,
Cyan Breathing - Connected and stabilised,
Pink Flash - Data sent.
Yes. Each Oizom Instrument has a unique identification with geo-tagging.